Notice of Fire Hydrant Testing

 

CMD Logo

Chester Metropolitan District will be performing fire hydrant testing January 25, 2017 through January 31, 2017.

All testing is done by District personnel. The goal of this testing is to assure a reliable water distribution system, aid in planning future projects for our Capital Improvements Program, and provide data on how the system will perform in the event of a high flow situation, such as a fire. The fire hydrant testing includes capturing flow readings, flushing of the fire hydrant and line, and documenting any inefficiency found. During these tests, sediment may be stirred up which may result in discoloration or suspended particles in the water. Citizens who experience any unusual water clarity problems after the hydrants are flushed are encouraged to turn on a cold-water faucet outside of the house and let it run for 5 to 10 minutes. This will normally clear up the agitated water from the service line to the home. Sediment can accumulate in the lines which can cause discoloration in laundry. It is recommended to check that both the hot and cold laundry water is clear before washing. A slight decline in water quality is common immediately after fire hydrant testing has occurred. If water quality does not improve or further problems occur, contact Chester Metropolitan District by calling 803-385-5123.

Spread the Word!Share on FacebookTweet about this on TwitterShare on Google+Pin on PinterestShare on LinkedInShare on RedditDigg thisEmail this to someonePrint this page